Hello world ! WELCOME TO NEW TECHNOLOGY

10:36:14 AM - Tuesday, June 26, 2012

Home

Search This Blog

Crack or reset administrator password on your computer

So if you have forgotten the password of your admin account in Windows XP or just want to break in the Admin account of your college or office, do not worry, you can easily do that. However, I recommend this trick only for your personal use. There are numerous ways available to do so but the best possible way is to use EBCD (Emergency Boot CD), download from here.

Procedure:

1.    After you have downloaded the EBCD, extract and run “makeebcd.exe” to create an iso image for burning on the disk.

2.    Set Bios to boot from the CD Drive and insert the CD created in above step. You will see the following image, type 5 to select NT password for editor (Linux-based).

3.    Then press Enter in the next step to proceed.

4.    Press Enter again if you don’t keep Windows on SCSI drive.

5.    Select which drive contains your installation files or just press Enter to accept the default value given in the bracket. If your installation is in C: drive just press Enter.

6.    Press Enter in the next step to accept default values.

7.    Press Enter again.

8.    To enter password, press Enter to select the default option.

9.    Select the username. To enter password for Administrator just press Enter.

10.    To change the password just leave it blank and change it later after login (modifying password at this step will not work).

11.    Press Enter to confirm.

12.    Type ‘!’ and press Enter in the next step.

13.    Type ‘q’ to quit.

14.    Type ‘Y’ to write the SAM files.

Congratulations the password has been reset.

Download Windows 7 SP1 all ISO Download Links

These are now available for those who currently have Microsoft Windows 7 with Genuine Activation Keys. These are the legitimate downloads, full ISO image to burn to a good quality blank DVD using any good image burning program such as ImgBurn or the like.
These ISO image download have Service Pack 1 integrated into the installation setup, so therefore there is no need to separately install SP1 after the initial install of Windows 7.
NOTE! NEW COMPLETE DOWNLOAD LISTING!
Windows 7 SP1 ISO Download Links Including English and Foreign Language Versions:


These are very high speed downloads which should take anywhere from 30 minutes to about 50 minutes, if you have a high-speed broadband connection.
My download took approximately 18 minutes from start to finish. Both IE9 and Firefox have their own download managers you may use to accomplish the download.

To activate this Product Click here to download Windows 7 activator

Download TALK IT ! Software Letest version Preactivated

Talk it ! is a repackaging of the classic  text to speech engine !

You won't notice any difference between  Talk it!  and the original program - in fact, it just seems to have been repackaged in a new installer. The first thing you'll notice is that the program looks old-fashioned and comes with no configuration settings. It doesn't integrate into Windows, meaning that if you want to convert something from text into speech with Talk it ! , you'll have to manually type or paste it into the window.

Talk it !  gives you a selection of voice "personalities" to choose from, and you can also manually change the pitch and tone. There are also options to modify the pitch quality and vocal effect, and the program is capable of dealong with texts in both Spanish and English.

When Talk it !  was first released back in 1995, there's no doubt it was an innovative and high-quality product. Looking at it now, however, it seems old-fashioned and considerably less attractive than the many  other tts options  out there. Add that to the fact that Ogif's TalkAny is simply an old program in a new installer, and it becomes very clear that you should look elsewhere for your text to voice needs.

                    Click here to DOWNLOAD

How to Run Mobile Java Applications on Computer

Most of the applications and games based on java have a .jar extension. But sometimes, we need to check them on the system before installing them on the mobile. Unfortunately, Windows does not support these types of files (like games ) so you cannot run .jar files directly on the PC.

There are two ways to run .jar applications on the PC. The first way is to convert the .jar format into .exe format and use the application directly on PC. The other way is to use an emulator. An emulator provides us the facility to run .jar applications directly on the computer. With the help of these emulators we can use mobile applications and play mobile games on the PC . There are two popular emulators available on the internet.

Free Emulators to run java applications on the system:

1. Midpx Emulator

The Midpx emulator is a freeware software . This software has both options – it can convert the .jar format into .exe as well as run .jar format directly on the system. Both ways work satisfactorily.

You can download it from here

[Download Midpx Emulator]

or

2.KEmulator

The K emulator is a freeware software too.

[Download KEmulator]

How to use the emulator?

  1. Download KEmulator
  2. Extract the zip file
  3. Run KEmulator.exe
  4. Navigate to Menu: Midlet->Load Jar/Load with console and choose the game that you want to open.

The features of this emulator:

  1. Play or run mobile games/applications on your PC
  2. Video Recording of your activities
  3. Screen Shots of your activities
  4. Keypad like in Mobile
  5. 2D and 3D graphic engine

How to Use Software after Trial Period

Some good software are available on the internet for trial purposes only. These software stop working after a specific time period like 10 day, 15 day or 30 day trials. After the trial period has ended there is no way to use these software again without either reinstalling Windows or purchasing license. But reinstalling Windows only for a software doesn’t make sense. A small utility can help you here. You can use Time Stopper to eliminate the time limit existing in a trial software usage period. Time Stopper works with any software’s executable file and will practically extend the trial period of the program for an unlimited amount of time. According to Brothersoft and Cnet, Time Stopper is listed under the best 50 utility software products of the world. So with the help of this special utility you can use your trial based software for as long as you wish.

time-stopper-banner

How to use?

Using Time Stopper is a very easy task; just locate the executable file of your trial program (generally located in C:Program Files) and select the new installation date. Now, your program trial period will be automatically extended to another 30/90 days, depending on the software. Time Stopper does not affect your system time so you can use it without worrying about your system date and time. You can also configure the program to make a program to be run at a particular date.

time-stopper-1

After launching the software, click on Browse and locate your trial program’s file path. Now click on Choose the new date option and set the new date for expiry of the trial version.

time-stopper-2

After setting of new date, enter the name of a new desktop shortcut and delete all other old shortcuts of your trial version software from the desktop.

time-stopper-3

 

       [ Download Time Stopper]

How to capture login screen in windows 7

I am talking about capturing screenshots in Windows 7 and I know that your answer is its very easy task. But what you will do if want to capture screenshot of your Windows 7 login. Yes it is very difficult task and you can’t do this without and third-party tool. You can capture Windows 7 login screen by help of Windows 7 login Screen Camera.

windows-7-login-capture-camera

It is very small and freeware utility for capture Windows 7 login screen. If you are blogger or software developer and developing software for Windows then this tool can help you for describe your creation for Windows 7 login.

How to Windows 7 login Screen Camera ?

1. Download it from here and extract compressed file.

2. Now open installer file for Install or remove this software from your computer then click on Install button. It will install within short time.

win-7-login-capture

3. Now, switch to logon screen (use Windows + “L” Keys) or you can use Switch User option from Windows Start button and then click on Ease of Access button to launch Win 7 Login Screen Camera tool.

win-7-login-capture-1

4. For uninstall this tool open same installer file and click on Remove button.

Any Problem Please Comment Below…

How to unlock Huawei E1732(Idea Netsetter new)

Unlock any new version latest huawei idea e1732 3g USB netsetter with dc unlocker software (permanent solution)


Unlock huawei idea netsetter:

As we know idea has launched E1732 Few Months back which is a 7.2 Mbps modem and comes with the Customized firmware so we can not unlock it by updating firmware or by just providing the unlock code so we were working on it from last six months and finally I am here with the solution for permanent solution so grab it

Steps You Have To Follow:-

  • Install Dc Unlocker in Your Computer
  • Plug your modem in pc and open dc unlocker
  • Select Huwaei Modem from Modems Menu and Select Auto Detect in Model Box. Click on Search Modem and you can see the following Screen

  • Now Goto Unocking Tab And Click On Unlock and you can see it will unlock it just 5 second and you are Done wlEmoticon smile [How To] Unlock Idea E1732 (Permanent Solution)

That's it.......
Have nice day.........

Unlock huawei e1732 idea netsetter permanently

a new way to unlock huawei e1732 idea netsetter permanently

many people had problems with unlocking idea netsetter huawei e1732. so here is a new method introduced by nill and it works 100%. first of all you must have patience doing this. because the process it bit long. and also you have to download some softwares. and while downloading the software you will have to disable your antivirus as the crack for the cdma workshop is considered a virus by many anti virus softwares. so these are the things that you should note while unlocking your huawei e1732 idea netsetter usb modem. and also you should not start your huawei e1732 dashboard

so here is the step by step guide to unlocking huawei e1732 idea netsetter
  • download the cdma workshop and save the cdma workshop v 2.7.0. you must disable antivirus before opening the cdma workshop

cdma workshop free download

  • download huawei e1732 downgrader

huawei e1732 downgrader free download

  • insert a non idea sim to your huawei e1732 netsetter
  • now you must find the common port to which your huawei e1732 modem is connected. you can do this by.
    • Right click on your “My Computer” icon > Properties > Device Manager > Ports (COM & LPT)  > HUAWEI Mobile Connect – 3G Application Interface (COM[The port number appear in your system])
  • note down the com port number into which your huawei e1732 idea netsetter modem is connected
  • Run “CDMA Workshop v2.7.0.exe”
  • Select the Port that you noted from your Device Manager under the Port option in “COM Settings (AT mode)” under the “Main” tab.

idea netsetter e1732 permanent unlock

  • then click on connect and then click on read

idea netsetter e1732 permanent unlock

  • Go to the “Security” tab > Type “000000” in the blank box under “SPC” > Click on “SPC” button > Click on “Send” with Default (nv_read) as SPC.

idea netsetter e1732 permanent unlock

  • Click on “Memory” tab > NV Items > Read > Now a “Conform” box will appear > Click “OK” > Now a “NV Items Backup” box will appear > In the box straight to “Last NV Item” type “9999” > Click “OK” > Save the file by giving a file name you like (Eg: E1732Unlock etc.)

idea netsetter e1732 permanent unlock

  • When the buffer reach “100%” your file is saved successfully > Now a “Information” box will appear > Click “OK” > Minimise “CDMA Workshop v2.7.0”
  • Run “E1732 Downgrader” >  accept the agreement > Next > Wait for a few seconds until the search for your modem finishes > (Don’t mark on “Auto remove the device after update”) Next > (Don’t remove your data card until the process is finished) > Start > At the end of “Downloading Programs…” you will get a “Update Failure!” error dialog box (DON’T WORRY & DON’T GET DISAPPOINTED) > Click “OK” > Click “Finish
  • Restore “CDMA Workshop v2.7.0” > “Main” tab > Disconnect
  • Unplug your Idea Netsetter (Modem) from your computer.
  • Again Plug it to the Computer > Check the “Port” again from the “Device Manager”
  • Go to “CDMA Workshop v2.7.0” select the Port that you noted from your Device Manager under the Port option in “COM Settings (AT mode)” under the “Main” tab as we did before > Click on “Connect” > “Memory” tab > NV Items > Click on “Write” > A “Confirm” box will appear > Click “OK” > “Open” dialog box will appear > Open the file that you saved before > When the buffer reach “100%” a “Information” dialog box appears with a success message > Click “OK” > “Main” tab > Disconnect
  • Now close “CDMA Workshop v2.7.0” > A “Confirm” dialogue box will appear > Click “NO”
  • Close everything > Enable your Antivirus
  • That’s it. Your Idea Netsetter E1732 is unlocked successfully.
  • Unplug Idea Netsetter (Modem) from your computer.
  • Again Plug it to the Computer.
  • Wait for Idea Netsetter to Start
  • Put a SIM Card other than IDEA to the Netsetter / ModemIf it again shows “The SIM/USIM card not been detected or is invalid” (DON’T GET DISAPPOINTED) > Click “OK” > Wait for the SIM card to be detected > It will detect the SIM card and enjoy browsing with any other SIM.
  • to make new mobile apn settings you can download huawei mobile partner. read and download mobile partner from this page

many people are having problem while connecting to internet with other sim cards
now you can connect by any sim card with default IDEA net Setter Dashboard using these steps
If your Modem is detecting sim cards and you are getting errors then do this
for XP
1 Control Panel -> Phone and Modem (found directly in control panel or in Printers and other hardware ) –> modem tab –> huawei mobile connect 3g modem (which is present on COM ) –> –> properties advance –> in extra initializing command use given commands and click OK
for windows 7
start menu -. type phone and modem — click on it—>modems –>huawei mobile connect 3g modem–properties–>change settings–>advance–>extra initialization command–>use given command

and if it ask for Country and area code then Country – India and Area Code – 91 and leave other blank

commands are here

Aircel – AT+CGDCONT=1,”IP”,”aircelgprs”

Airtel – AT+CGDCONT=1,”IP”,”airtelgprs.com”

BSNL – AT+CGDCONT=1,”IP”,”bsnlnet”

Idea – AT+CGDCONT=1,”IP”,”internet”

Reliance – AT+CGDCONT=1,”IP”,”rcomnet”

Tata Docomo – AT+CGDCONT=1,”IP”,”tata.docomo.internet”

Videocon – AT+CGDCONT=1,”IP”,”vinternet.com”

Vodafone – AT+CGDCONT=1,”IP”,”www”

if you have any trouble doing this please comment here

How to Add Program Shortcuts and Other Useful Shortcuts with Icons in Windows 7 and Windows 8 Desktop Context Menu?

 

Today we'll learn how to add any desired program shortcut in Desktop context menu. Also we'll learn to add other useful shortcuts like "Change Wallpaper", "Screensaver", etc.

1. Type regedit in RUN or startmenu search box and press Enter. It'll open Registry Editor.

2. Now go to:

HKEY_CLASSES_ROOT\DesktopBackground\Shell

3. Now we'll need to create a new key under "Shell" key. Right-click on "Shell" key and select "New -> Key". Give the new key any desired name e.g. "Registry Editor" (without quotes).

4. Now we'll need to create another new key. Right-click on the new key which we created in the last step e.g. Registry Editor and select "New -> Key". Give the new key name of command.

5. Now select "command" key and in right-side pane , you'll see "Default" String value. Double-click on it and set its value to the path of desired program's EXE file. For example, if you want to add "Registry Editor" shortcut, then set value of "Default" to regedit.exe

Adding_Program_Key.png

6. Now the new shortcut will start appearing in Desktop Context Menu.

New_Program_Shortcut.png

7. Now some advanced options!

You can now define the shortcut icon and position.

To set an icon for the shortcut, select the key created in Step 3 and in right-side pane, create a new String value "Icon". Set its value to your desired icon or simply put the path of program's EXE file and it'll automatically show its default icon.

To set its position in the context menu, create a new String value "Position" and set its value to:

Top (To show it at top)
Bottom (To show it at bottom)

Adding_Program_Key2.png

That's it. Now you'll see an icon near the program shortcut and its new position.

New_Program_Shortcut2.png

8. If you want a ready-made registry script to do the task automatically, then copy paste following code in Nodepad and save the file with name "Hathile.REG" (including quotes).

 

Windows Registry Editor Version 5.00

[HKEY_CLASSES_ROOT\DesktopBackground\Shell\regedit]
@="Registry Editor"
"Icon"="regedit.exe"
"Position"="Bottom"

[HKEY_CLASSES_ROOT\DesktopBackground\Shell\regedit\command]
@="regedit.exe"

 

Run the file and it'll add the program shortcut in Desktop context menu.

If you want to add other program shortcut, then simply change the BOLD part in the script.

NOTE: You can use this method to add any desired program shortcut or to add various useful shortcuts in Desktop context menu. You just need to simply change the Key name and the value of "command" key to the correct path.

Change_Wallpaper.png Change_Screensaver.png System_Properties-1.png

Download Nitro PDF Editor Professional 7.3.1.10 With Serial Key

Nitro pdf editor pro 7

PDF made easy.

 

Nitro Pro 7 gives you a powerful set of easy-to-use tools that make working with digital documents simple, straightforward, and more cost-effective.

Nitro PDF Professional, the complete Adobe® Acrobat® alternative, enables you to do more with PDF through powerful tools to create, convert, edit, combine, secure, annotate, form-fill, and save 100% industry-standard PDF files. Recipient of multiple best product awards, Nitro Pro is specifically designed for the business user and makes working with PDF faster and easier than ever before!

Create PDF

Create PDF and PDF/A files from virtually any Windows application, with full control over PDF output options. Offering one-click conversion for many commonly-used file types (including Microsoft Word, Excel, PowerPoint, WordPerfect, and more), Nitro PDF Professional simplifies the PDF creation process. All PDF files created with Nitro PDF Professional are 100% compatible with other PDF viewing applications including Adobe Reader and Adobe Acrobat.

Edit PDF

Edit PDF content, no matter what it is. From correcting minor typos and updating or removing text, to advanced image editing tasks such as inserting, replacing, cropping, resizing and downsampling, Nitro PDF Professional makes it easy to make last-minute edits. Create consistency throughout your documents by inserting headers, footers, watermarks, page numbering and more. Edit document properties and optimize PDF for distribution, creating polished, recipient-ready PDF files.

Convert PDF

Easily convert PDF to Word and PDF to RTF with industry-leading accuracy, enabling quick content reuse in Microsoft Word, WordPerfect, OpenOffice and more. Extract text and images from PDF files in a single click, for trouble-free repurposing in other programs. Copy entire blocks of text or take snapshots of PDF pages for quick pasting into another document.

PDF forms

Create PDF forms quickly and easily using a robust set of form design and editing tools. In just a few clicks, turn static PDF documents into professional-looking PDF forms containing text fields, buttons, checkboxes, javascript and more. Fill in, submit, print and save PDF forms, all without breaking the bank.

Secure PDF

Control how people view and use your sensitive and confidential information through robust PDF encryption. Use passwords and digital certificates to restrict who can open files and perform other tasks such as printing, editing, copying and form filling. Use digital signatures and certification to ensure document integrity and prevent content tampering.
Assemble & combine PDF
Combine documents, spreadsheets, presentations and more into a single, polished PDF file. Nitro Pro's powerful editing tools enable you to reorder, delete, insert, extract, replace, split, and rotate pages, providing you precise control over your entire document while guaranteeing your information is presented exactly as intended.
Release description

New features
Convert PDF for reuse in Microsoft Word, WordPerfect, OpenOffice, GoogleDocs, and more with the most accurate, industry-leading PDF conversion technology. Create highly-editable files that retain page layouts, working tables, correctly justified paragraphs, drawing shapes, and more.
Create PDF files up to 50% faster
Summarize comments for paper-based viewing
PDF/A compliance support
Document management system (DMS) integration support
Grid and Snap-to-Grid tools
Full control over the PDF creation process
Major user interface improvements, including a new, easy-to-access Navigation pane, a Comments List panel for working with more detailed comments, and a dedicated Text Editing context ribbon for inserting and updating text.
Major improvements to the underlying PDF library for faster processing of all files.
New features
Support for all 64-bit versions of Windows.
A replace text commenting tool.
Support for 'Show/hide field' action.
Full support of Unicode fonts (in all areas of the application) including Chinese, Japanese and Korean.

               Click Here to    Download